Novos TBS1000C de 50 MHz, 70 MHz, 100Mhz e 200MHz de 2 canais.

Com mais memória (20K), melhoria na performance das pontas de prova e interface melhorado.

Novos Osciloscópios da Série MSO6B agora com versões de 4, 6 e 8 canais.

The SH-60S-AOA provides the ability to triangulate the location of an interferer on a map for signals between 9 kHz and 6 GHz.

 

  • Integrating digital maps, GPS location and signal strength vectoring, the SignalHawk AOA provides an easy-to-use interface to pinpoint potential in-band interferers, “rogue” broadcast locations and dead spots.

Site Master Handheld Cable and Antenna Analyzer S331L

 

  • Return Loss
  • VSWR
  • Cable Loss
  • Smith Chart (50/75 ohm selectable)
  • 1-port Phase
  • Distance-to-Fault Return Loss
  • Distance-to-Fault VSWR
  • RF Power (50 MHz to 4 GHz)
  • VIP Mode; Optical connector inspection with IEC 61300-3-35 based Pass/Fail standard (requires USB Video Inspection Probe G0306A, sold separately)

OTDR - ACCESS Master MT9085 Series

 

  • 8-inch LCD with easy visibility even in direct sunlight
  • Better work efficiency with synergy of LCD touchscreen, rotary knob, and dedicated hard keys
  • Familiar functions and operations from previous ACCESS Master series
  • Easy-to-Use Fiber Visualizer function for simple fiber path analysis
  • Fast fiber bend location using high-speed, high S/N real-time sweep modes
  • High-accuracy event detection and loss measurement (46-dB dynamic range max., 0.8 m event dead zone)
  • Identification of each splitter event and up to 1 × 128 branches
  • Optical loss test and optical power measurement with built-in light source, optical power meter, and visible light source options
  • Optical fiber end-face inspection using external fiberscope option

BK 9140 Triple Output Multi-Range DC Power Supplies

 

  • Three independent, floating output channels for up to 100 W per channel or 300 W total
  • High power density, compact 2U half-rack form factor Multi-ranging operation 
  • Low output ripple and noise down to 1 mVrms
  • Combine outputs to increase voltage up to 180 V or 24 A (depending on model)
  • USB (USBTMC-compliant) and LXI compliant LAN standard, GPIB option LabVIEWTM, IVI-C, and IVI.NET drivers provided, Operating software available cTUVus certification mark

BK 5335B Power Meter

 

  • 600 Vrms ( Cat II ) and 20 Arms direct input ranges, Frequency ranges DC, 0.5 Hz to 100 kHz
  • 0.1% basic accuracy for voltage and current measurements, 4.3-inch color LCD (TFT)
  • Simultaneously measure and display up to 12 different measurement parameters, Capture inrush current, and voltage surge with the peak function, Harmonic measurements to the 50th order, Integration function with auto range switching
  • Ability to measure electric energy w/ produced or consumed, Pre-compliance testing according to IEC/EN62000-3-2 / 4-7
  • Standard USB (USBTMC-compliant), GPIB, RS232 and LAN interfaces, Line and freq. filter capability for reducing unwanted signal noise
  • Optional universal breakout box to simplify connection between power meter and DUT

Fluke Serie 1770 Analisadores de qualidade de energia trifásica

 

          Características principais

  • Meça automaticamente parâmetros de energia e de qualidade da energia
  • Estado da qualidade de energia imediato para uma resolução de problemas mais rápida
  • Verifique facilmente dados de V/A/Hz, energia, descidas, subidas e harmónicos
  • Capte transitórios de alta velocidade até 8 kV
  • Alimentação direta a partir do circuito de medição sem cabo de alimentação

Fluke LinkIQ Testador de Cabo+Rede

 

          Características principais

  • Medir a capacidade da rede até 10 Gig através de medições baseadas em frequência
  • Solucionar problemas de redes ativas fornecendo informações do switch conectado (nome do switch, número da porta e informações de VLAN)
  • Instalar e solucionar problemas de dispositivos PoE através de negociação de switch e teste de carga PoE
  • Teste de mapa de fiação gráfico e comprimento para identificar falhas comuns que ocorrem com a instalação do cabo
  • Documentar o trabalho através do relatório LinkWare™ PC
  • Suporte a todos os protocolos Ethernet industriais (EtherNet/IP, PROFINET, EtherCAT e outros)
  • O kit Ethernet industrial suporta conectores industriais (M8D, M12D, M12X)